9 Models for excavators with operating weight from 0.6 to 8.5 t.
MONOBLOC BODY WITHOUT TIE-RODS
The particular monobloc-body construction with metal heat-hardening treatment, gives the structure more resistance to the efforts of leverage at work. The breaker is manufactured in one piece and there are no tie rods.
N2 ENERGY SYSTEM
The hammer works with nitrogen inertial energy recovery. The gas gives much power to the machine and it also reduces stress on the arm of the excavator.
HIGH TIME CHARGE OF NITROGEN
In the past the hammers worked with gas energy recovery, required frequent refills. With this new range, using special sealing rings on the floating support, we have increased by 300% the residence time of the gas.
INSONORIZED
The particular monobloc-body construction, associated to the closed casing box , and the insertion of sound-absorbing material, has allowed to reach a very low working-noise levels.
PRESSURE
The SK series accepts very high values of back-pressure and very large range of calibration of the required oil flow, in order to facilitate the installation.
VISIBILITY
The SK series, with their streamline shape, allow good visibility during the work and allow to operate close to walls.
The DEMAL crusher bucket is ideal for your recycling needs about material coming from demolitions, quarries or natural stones. Built in HARDOX 400 ensures high production standards, reducing jaws wear. From FB250 model is available on request the electromagnet for metallic material separation (optional).
Crushing Bucket
The DEMAL crusher bucket is ideal for your recycling needs about material coming from demolitions, quarries or natural stones. Built in HARDOX 400 ensures high production standards, reducing jaws wear. From FB250 model is available on request the electromagnet for metallic material separation (optional).
5 models for excavators from 12 to 55 ton
- Adjustable size setting of Crushedmaterial from18mmto130mm.
- Eccentric-moving jaws system.
- Interchangeable anti-wear plow bolt inner plates (from FB300 HD)
- Interchangeable crushing jaw kit.
- Powerful Piston Motor
- Centralized greasing system
6 Models for excavators with operating weight from 1,5 to 31 ton
Selector grab for excavator and mini excavators from 1.5 up to 31 ton. This extremely versatile grab is widely employed for recycling, handling and demolition of non reinforced structures. It is used on construction sites for brick demolition, waste, wood, paper, aluminum and plastic handling, or where it is necessary to select or move material. It is considered a sort of “helping hand” of the construction site. Sturdy construction, high efficiency jaws movement, it features two jaws built in high tensile steel HB400 operated by an hydraulic cylinder and 360° hydraulic rotation.
Upper flange easy to match with any kind of coupler, either direct or quick.
▶ Interchangeable blades
▶ 360° Rotating
▶ 3 Models of jaws for any kind of handling use